Specifications
One 762 mm chamber — the 30-inch model in our bioethanol fire inserts range — sized for a wall cavity. It runs on ethanol vapour: the fuel is vaporised under electronic control and burned as a gas, so the flame holds its height from the first minute to the last, with no manual topping up, no smoke and no ash. Cut in SS304 to fit the opening on your drawing, it is what makes a modern ethanol fireplace possible without a flue.
Technical data
- Material
- SS304 stainless steel
- Flame size
- 644 mm L
- Unit dimension
- 762 L × 193 W × 168 H mm
- Fuel capacity
- 5.7 L
- Approx. burn time
- 10–14 hours
- Heat output, net
- 3,409 W / 11,630 BTU
- Minimum room
- 35–40 m²
- Weight
- 23 kg gross · 15.5 kg net
- Voltage
- 110–240 V
- Application
- Indoor use only
- Certification
- CE · UL 1370 (OTL)
- Combustion
- Ethanol vapour (BEV)
Certification
Two independent programmes sit behind every burner — an EU EMC test report for CE, and an OTL certification to UL 1370 for unvented alcohol-burning decorative appliances. Both documents are downloadable below.
CEEuropean Union — EMC Directive 2014/30/EU
- Harmonised standards
- EN IEC 55014-1:2021EN IEC 55014-2:2021EN IEC 61000-3-2:2019 +A1:2021EN 61000-3-3:2013 +A1:2019 +A2:2021 +AC:2022
- Testing laboratory
- Kiwa Gastec (China) Ltd, Guangzhou — IAS accredited
- Report number
- 705358-002
- Date of issue
- 3 December 2024
UL 1370North America — OTL certification
- Standard
- UL 1370 — unvented alcohol fuel burning decorative appliances
- Certification body
- OMNI-Test Laboratories, Inc., Portland, Oregon, USA — ISO/IEC 17067 System 5
- Report / project no.
- 0590AF001S · QC file 0590-QC01-2026
- Date of issue
- 8 June 2026
- Result
- Final inspection passed — no findings discovered
The CE report covers the full ILFP-SR18 to ILFP-SR96 range — the models are identical apart from fuel capacity. Certificates, declarations of conformity and test summaries for a specific project are available on request.
Installation & clearance
The burner drops into a cut opening in a non-combustible surround — no chimney and no flue. A standard three-prong grounded 110/240 V outlet must sit inside the wall cavity, within reach of the burner's lead.
This chamber is specified for indoor use only. If the brief calls for outdoor built in fireplaces — a terrace wall or a covered loggia — say so at the enquiry stage: the chamber, the sealing and the finish are specified differently, and the same drawings are re-issued for it.
ClearanceAbove the fireplace: 500–600 mm (19-11/16″ – 23-5/8″)
Cut openingA 183 · B 752 · C 250 mm (7-1/5″ · 23-3/5″ · 9-4/5″)
Wall cavityA 383 · B 952 · C 450 mm (15″ · 31″ · 17-3/4″)
SurroundNon-combustible board, stone or metal; keep the clearances on the drawing
Warranty & compliance
We provide a 5-year limited warranty on our smart ethanol fireplace products, covering all digital and mechanical components required for the correct and safe performance of the unit.
Where the diagnosis confirms a defect in materials or workmanship, we provide the required replacement part(s) free of charge, including shipping cost, for the duration of the warranty period.
Liquid in.
Vapour out.
BEV — burning ethanol vapour — is why the same 5.7 L lasts 10–14 hours here instead of 5.4–9.8 hours. The trough is built in two layers: the lower one holds the reserve of liquid ethanol, the upper one is charged with a small measure and lit. That flame heats the trough beneath it within seconds, the reserve vaporises, and the vapour rises into the flame. Liquid is only ever the source; what burns is gas.
- 01
Fill — the lower trough takes the reserve.
- 02
Ignite — a measure in the upper trough lights and heats the metal between them.
- 03
Vaporise — the reserve turns to gas and feeds the flame, which keeps the cycle running.
Liquid vs BEV
We ran a BEV burner and a liquid burner on the same bench, at the same fuel level, and stepped them through five levels on camera — flame height, flame spread, the sound inside the chamber and the temperature of the top plate. The housings match. The fire does not.
| Measured on film | BEV | Liquid |
|---|---|---|
| What burns | Ethanol vapour — the liquid is vaporised first | Liquid ethanol, burning in the tray |
| Flame at level 1 | 5–8 cm, touching 10 at the peaks | 13–15 cm |
| Turning it up | Grows taller | Grows wider, until it spans the chamber |
| At level 5 | Gentle, still about 10 cm | Up to about 25 cm |
| Inside the chamber | Looks empty — no liquid to see | Liquid visibly boiling |
| Sound | Quiet | A sizzle from the tray |
| Top plate | Warm — you can rest a hand on it | Hot |
| Burner body | About 29 °C | About 29 °C — the same |
| Clearance above | Smaller clearance is enough for a TV or a shelf | More clearance needed |
Read off the film at the same fuel level through the same five steps. Both units share the housing, the controls and the cut-out — only the way the fuel burns changes.
Smart Control
The SR-30 BEV speaks the language of the room it sits in. Tuya and Smart Life, Apple HomeKit, Google Home, Amazon Alexa and SHS connect over Wi-Fi and the cloud — so lighting the flame is one tap, or one sentence, away.
Where the building is wired, the burner also exposes RS-485, RS-232 and dry-contact interfaces, with an optional Zigbee bridge. That is how KNX, Crestron, Control4, Lutron, Savant, RTI, Z-Wave, Modbus, M-BUS and Taphome bring it into the same scene as the lights and the blinds — a bio fireplace that answers to the room, not to a separate remote.
Take a closer look
-
Exceptional Durability
304 stainless steel is renowned for its resistance to corrosion and rust, which makes it the right choice for a fireplace that has to stand the test of time. Personalise it to your room: the same panel comes in silver, black, mirror and gold, electroplated onto 304 rather than applied as a film that can lift.
-
Multiple Control
The burner answers to the handset, to the keypad under its flip-up lid, or to the app on your phone. Where a smart home system is already there, it is wired into that as well — the flame then responds to the room instead of a second remote.
-
Matte black
Brushed silver
-
Safety First
The fuel tank is independent and made of 304 stainless steel, kept away from the flame. Fuel travels to the combustion chamber through the feed pipe and the pump system, while an electronic igniter and a temperature sensor look after the whole sequence — they light the flame, and they decide whether it stays lit.
-
5 Flame Settings
One of the standout features of the burner is its five flame settings, there to be matched to the moment — a gentle flicker for a quiet evening, a fuller flame for a cold night. Two presses light it, then the height is yours to choose.
Eight protections. Five sensors. One flame.
The burner watches itself. Temperature, fuel level, over-heating, tilt and CO₂ are read continuously while the automatic feed keeps the flame at the height you set — and closes the fuel line the moment something reads wrong. It is the part that lets a modern ethanol fireplace run in a room with no flue, no damper and no chimney sweep.
- 01Temperature sensor
- 02Fuel level sensor
- 03Over-heating sensor
- 04Anti-tilt sensor
- 05CO₂ sensor
- 06Auto filling
- 07Auto feeding
- 08Auto ignition
Fits a 752 mm opening.
Nothing behind it but a socket.
Cut the opening, line it with a non-combustible surround, leave a grounded 110/240 V outlet inside the cavity — an ethanol fireplace indoor installation needs nothing else in the wall. There is no flue, no chimney and no clearance to combustible framing beyond the figures below.
| A | B | C | |
|---|---|---|---|
| inch | 7-1/5″ | 29-5/8″ | 9-4/5″ |
| mm | 183 | 752 | 250 |
- For correct operation of the smart fireplace, the unit must sit 100% horizontal — check it with a spirit level before the surround is closed.
- A live, grounded (earth) socket is required inside the wall, positioned bottom right and ideally below the level of the tank.
| A | B | C | |
|---|---|---|---|
| inch | 15″ | 37-1/2″ | 17-3/4″ |
| mm | 383 | 952 | 450 |
Fire surround material recommended: a heat-resistant material that withstands min. 150 °C. Non-flammable options: bricks, tiles, stone, steel.
Easy to control.
Clean by design.
Everything is built into the chamber — a pump, a level sensor and an ignition coil. Fit the suction hose into a can of bioethanol and the ethanol burner fills itself; two presses on the power button light it; the handset, the buttons on the unit, the app or a wall switch then hold the flame at one of five levels. In the BEV the fuel leaves the chamber as vapour, so the burn is even and slow instead of hot and short — no funnel, no lighter, no gauge to watch, which is what a bioethanol fire indoor installation should feel like.
It is real ethanol vapour, not an LED effect — the flame moves, reflects in the brushed steel and runs for 10–14 hours on a tank. And it burns clean: water vapour and a trace of CO₂, no smoke, no soot, no smell, no chimney to sweep. One press closes the fuel line and it goes out inside the chamber.
Ethanol burner insert — many options
Can be installed in various arrangement options — single-sided, three-sided, double-sided, island, corner and room divider — because the same bioethanol burner insert is re-chambered for each one.
-
Single-sided -
Three sided -
Double sided -
Island -
Left / right corner -
Room divider
Every arrangement is quoted per opening: send a sketch and we return the option that fits, with the firebox depth it needs. Most biofuel insert fireplaces in our order book are three-sided or island builds; a double-sided biofuel fireplace is the usual answer where the flame has to face two rooms, and a single-sided biofuel indoor fireplace is the simplest retrofit into an existing wall. Because the chamber is the same across the range, a bio ethanol insert fireplace, a pair of biofuel indoor fires in a restaurant, or a single burner in a long feature wall all start from one set of drawings.
Questions, answered
The vapour flame, the opening it fits, and what changes against the liquid model.
01 What does BEV mean, and how does it differ from the liquid SR-30?
BEV stands for Burning Ethanol Vapour. In the liquid SR-30 the fuel is metered into an open tray and burns there; in the BEV the same fuel is heated into a vapour and burned as a gas. The chamber, the controls, the 762 × 193 × 168 mm footprint and the installation are shared.
In numbers: 10–14 hours per 5.7 L fill instead of 5.4–9.8, and 3,409 W net instead of 6,875 W — one tank spread over a longer, softer burn.
02 Does a vapour burner still need a chimney or a flue?
No. It is an unvented decorative appliance in the same certified family as the rest of the range — CE and UL 1370 (OTL) — so there is no flue, no damper and nothing to sweep. The only building service it needs is one grounded 110/240 V socket inside the wall cavity, within reach of the lead.
03 Why is the heat output lower and the burn time longer?
Because the fuel leaves the burner as vapour rather than sitting in an open tray, the same 5.7 L is released more slowly. The flame runs 10–14 hours at 3,409 W net, where the liquid model gives 5.4–9.8 hours at 6,875 W.
Choose the BEV where the fire runs all evening and the flame is the point; choose the liquid SR-30 where the burner is also expected to put heat into the room.
04 Will the SR-30 BEV fit the opening drawn for the liquid model?
Yes. Cut opening A 183 · B 752 · C 250 mm, wall cavity A 383 · B 952 · C 450 mm, the same non-combustible surround rated to 150 °C and the same socket position at the bottom right — a drawing issued for the liquid SR-30 is built the same way with the BEV.
05 What fuel does it take — can I use gel or ethanol gel?
Liquid bioethanol only. The burner vaporises the fuel itself, so gel fuel, ethanol gel and anything with added perfume or colouring are out: they leave residue in the vapour chamber and the feed line, and they void the warranty.
The tank is filled through the cap on the control plate, exactly as on the liquid model. Nothing is poured into the flame slot.
06 Is the vapour flame different to look at?
It is a little more compact and steadier — vapour burns as an even sheet rather than a tall, licking flame — and it keeps the full 644 mm width of the tray at all five levels.
The levels are set from the handset, the app, the three buttons on the unit or a dry-contact wall switch, and because the feed is metered, the height holds through the burn instead of dropping as the tank empties.
Want it in your finish?
Send the opening dimensions, the surround material and the finish you have in mind. You get a section drawing, a finish sample list and a quotation — a bioethanol fire place is only ever as good as the opening it sits in, so the drawing comes first.